service-mode-PANASONIC

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:41 pm

Chassis AC1 TX-G10 / C
login - Install the program in 1960
SHARPNESS parameter minimum.
Press (OFF TIMER) RC and holding press (▼) key on your keyboard TV
output - (NORMAL)

Chassis 11AK41
Login: - MENU 1675 OK

Chassis APEDP264/266 APEDP264 CF27SF14/24/34V CT-31F24 CT-31XE24CV CT-F29992LV/W/XV
login - Short-circuit point of FA1 and FA2 or conclusions 3 and 8 of the connector TR which is located on board A-board
output - Press the (ACTION) and (POWER) for 2 sec.

chassis CP-521 TX-29PM1P percent. TDA12021H1/N1D01, memory 24C16WP
login
- Install the program 99. SHARPNESS parameter to a minimum. Press MUTE
on the remote and holding press (▼) key on your keyboard TV
output - «Power OFF»

chassis CP-830FP TX-32PS12P prots.SDA55xx
login
- Install the program 99. SHARPNESS parameter to a minimum. Press MUTE
on the remote and holding press (▼) key on your keyboard TV
output - «Power OFF».

Chassis EURO-1 EURO-2 E2100 TX-21AD2C TX-29A3C TX-25A3C TX-W28R3 TX-21MD1C TX-W28D1F Proc. CCU30001-05
login
- Install lights NZCH BASS at max, and the regulator VZCH TREBLE by
min. Press (F) on the TV. Press and hold (VOL-) on TV. Press (REVEAL) on
the remote.
output - (NORMAL)

Chassis EURO-3 EURO-3H EURO-3W EURO-3HW EURO-3HWS TX-25AD50F TX-XD60C TX-W28/32/36D2DP/L percent. SDA30C164
login
- Install lights NZCH BASS at max, and the regulator VZCH TREBLE by
min. Click (REVEAL) on the remote. Press and hold button (VOL-) on TV
output - (NORMAL)

Chassis EURO-4 TX-25LD4C, TX-28LD4C Proc. SDA5450C48GE
login
- Install lights NZCH BASS at max, and the regulator VZCH TREBLE by
min. Press and hold (VOL-) on TV. Press (INDEX) on the remote.
output - (N)

Chassis EURO-5 EURO-7A
TX-25/28AD90F TX-32D5F TX-32PB50F / P
login
- Install lights NZCH BASS at max, and the regulator VZCH TREBLE by
min. Press and hold (VOL-) on TV. Press (INDEX) on the remote
output - (N)

Chassis EURO-1910 TX-29PS1F
login
- Install lights NZCH BASS at max, and the regulator VZCH TREBLE by
min. Press (F) on the TV. Press and hold (VOL-) on TV. Press (INDEX) on
the remote. What is logical and in other matters like the combination of
other models, except that this TV to adjust the volume on the TV panel
used one and same button, and select programs. Search and change
parameters, the colored buttons on the remote.
Exit - (N)

Chassis LH18 LCD TX-32LXD1
Login in the service - 1:
- Set the maximum BASS, TREBLE to minimum.
- Set the TV to the program number 99
- Simultaneously press INDEX button on the remote control and DOWN on the TV.
Login in the service - 2 (optional):
-
Being in the service-1 press the green button on the remote several
times to select the last paragraph of the service menu JPEG VIEWER.
- Knock on distantsionnike press HOLD, open the Tools menu-2 with options.
Button RED / GREEN navigate up / down
button yellow / blue to change the values
to remember the changes press STR separately for each item
output - Turn off in standby mode

M17 chassis TC-25GF10R, TX-33GF15P
login
1.Set volume 0.
2. Simultaneously press (RECALL) on the remote control and button (VOL-) on the front of the TV.

M18 chassis, M17W GAOO TX-29GF25T, TX-33, 29GF85T, TC-1924, 28WG12H, TX-29GF35T,
login
- Press the button at the same time (OFF TIMER) button on the remote
and the button (- VOL) on the front of the TV. To adjust the memory
chips after replacing jumper TPA4, connecting pin 3 of IC1213 chip to
ground the TV, and then include meals. device will switch MARKET MODE.
Exit - After the end of the jumper removed.

chassis MX-1A TC-21E1R Proc. MN152810TTC4
login
- Click on the main board of TV service button S1101. Appears SNK.
After the first press to regulate the basic (brightness, contrast,
saturation, volume and phase (horizontal alignment)). A second press of
the button allows you to adjust color mode RGB.
output - (NORMAL)

chassis MX-1A TC-14L3R, TX-21LT3P TC/TX- 14/21L3P, R; TC/TX- 14/21LT3P, R, TC-21E1R Proc. MN152810TTC4
Login
- Press the button on the main board S1101 (Service). The screen
illuminates a white field with no inscriptions. Clicking on the button
(Function) change control (brightness, contrast, saturation, volume,
tone, centering on the horizontal. Change in the parameter buttons (Vol
+), (Vol-). The second pressing S1101 takes the TV during the second
service under the mode, adjust : black level of R, G, B, swing signal R,
G and thin horizontal line (setting Uusk). [/ color]
output - (NORMAL)

Chassis MX-2A TC-29V50R Proc. MN152810TZN
login
- Click on a service switch S1101 (located next to the switch
alignment). TV will switch to check on the screen appears CHK. Click
S1103 (FUN) to select the desired adjustment.
Exit - S1101.

Chassis MX-3 MX-3C
TC-14F1, TC-F1D, TC-14L10R, TC1425RT, TC-20F1, TC-20L3R, TC-21F1T,
TC-21L10R, TC21S10R, TC-2125RT, TC-2105RT, TX-2150T/TS, TC2150R,
TC2150RM / RS, TC2170R / T Proc. MN152811TZT/TZX
Hotel Mode: 1. On
the remote control - (OFF TIMER), panel (CH UP) - incl. 2. On the remote
control - (OFF TIMER), on the panel - (VOL) - Off.
Login menu: Simultaneously press (RECALL) to control and (-VOL) on the panel.
output - Double-click (NORMAL) on the remote control.

Chassis MX-3V TC-14SV10S
login
- Adjust the volume to zero. Press (MENU) and then move the cursor to
the position FETURES. Click on the button OFF TIMER. Immediately,
simultaneously press the remote control (RECALL) and (VOL-).
Tools for VCR:
Set the volume to zero. Press (MENU) and then move the cursor to the
position FETURES. Click on the button OFF TIMER. Immediately,
simultaneously press the right button on the remote cursor (VOL-).

chassis MX4 Tx-29v70TPult: TNQE145 TNQE147.
Hotel Mode: To cancel this mode, press the VOL-key on your keyboard and TV OFF-Timer on the remote.
login
1) set the volume 0.
2) Set the timer for 30 minutes.
3) Click RECAL on the remote and VOL-keys on TV.
The display will show SNK.
The choice of sub menu buttons 1, 2,3,4,5.
Exit - N

Chassis MX-5 MX-5A
TC-14D2, TC-2119R, TC-25GF10R, TX-33GF15P, TC-20S2, TX-20S2T, TC-21Z2A Proc-MN1871681T
login
- Set the volume on the TV equal to VOL = 0, and set the timer to 30
MIN. Next, simultaneously press the CHANNEL UP button on the TV and
RECALL on the remote.
Exit - Double click (NORMAL) on the remote control.

Chassis MX-7 TS - 21RM30RQ percent TDA 9384
Login
- Adjust the volume to "0", and timer 30 min. On the panel press and
hold the "Vol-", but on the remote press RECALL, (which looks like a
screen with a plus sign). Changing the menu buttons "1" and "2". Getting
around the menu buttons "3" and "4". Change settings for "Vol +" and
"Vol-".
output - POWER OFF

Chassis MX-7Z TC-15PM50R
login
- Volume on (0), sleep timer for 30 minutes., Simultaneously press the
(-) volume on the TV and display on the console. switching control: the
book. 1 and 2 on the remote, or arrow up and down. Change the setting:
the book. 3 and 4, or the arrow on the remote.
output - POWER OFF

chassis MX-10 TX-29P80T
login
- Must be put to the panel the following data. These can be set on any
channel: Sharpness-min Volume-min-max Basses High-min timer 30min at the
same time, push the button (Display) (Volume -) bust features - buttons
1-2-3-4
output - (N)

chassis MX-12 TX-29PS70T
Login - VOL = 0, the timer for 30 minutes, RECALL on the remote and VOL-on TV.

chassis Z5 TC14S1RCP, TX14S1TCC, TC21S1RCP, TX21S1TCC, TX21S1TCP Proc. MN152811TBS
login - (OFF TIMER) in control (VOL-) on TV. Click on STR to store the changes.
output - (F)

chassis Z7 TX-21K1T / R, TX-21K2T, TX-14K1T, TC-14K1R, TX-14K2T, TX-21JTP3 percent. SDA5254-A008
login
- Vyberat 60 channel set sharpness to minimum and simultaneously press
the buttons (VOL-) and (OFF TIMER). Remember values (STORE)
output - (NORMAL)

chassis Z8 TX-21CK1 Proc. TDA9367PS/N1/4S0326
login
- Select 99 to set the value SHERPNESS at least. Pressed hold button
remote control (MUTE). Press the TV button on the keyboard (▼)
output - (NORMAL)

Model TX-21JT1P
login
- Select the channel 60 by setting SHERPNESS (SHARPNESS) at a minimum,
and simultaneously press the buttons (VOL-) on the front panel (OFF
TIMER) button on the remote.
Remember values (STORE

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:42 pm

PANASONIC
PANASONIC
Chassis AC1

Install the program 60 SHARPNESS setting minimum. Press
(OFF TIMER) and holding the remote control press (¢) on the keypad TV output - (NORMAL)
* * *
PANASONIC CHASSIS EURO-2, EURO-1 TX-21AD2C, TX-29A3C, TX-25A3C
Set BASS
control the bass to maximum, TREBLE knob treble
at a minimum. Press F on the TV at the same time with a button on the remote REVEAL.
* * *
Chassis EURO-3, EURO-3H, EURO-3W, EURO-3HW, EURO-3HWS. TX-25AD50F, TX-XD60C,
TX-W28/32/36D2DP/L.

Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min.
Click (REVEAL) on the remote. Press and hold button (VOL-) to the TV. Yield - (NORMAL)
* * *
Chassis EURO-4. TX-25LD4C, TX-28LD4C.
Install regulator NZCH
BASS on max, and the regulator VZCH TREBLE by min. Press and hold the (VOL-)
on TV. Press (INDEX) on the remote. Exit - (N)
* * *
Chassis EURO-5 EURO-7A. TX-25/28AD90F, TX-32D5F, TX-32PB50F / P.
PANASONIC
Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min. Press and
hold the button (VOL-) to the TV. Press (INDEX) on the remote. Exit - (N)
* * *
Chassis EURO-10.
Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min.
Press the (F) on the TV. Press and hold (VOL-) to the TV. Press
(INDEX) on the remote. What other matters in a logical and like a combination of other models
except that this TV to adjust the volume on the TV
uses the same buttons that select programs. Search and change
parameters are colored buttons on the remote.
* * *
PANASONIC CHASSIS EURO-2, EURO-1 TX-21AD2C, TX-29A3C, TX-25A3C
Set the BASS control the bass to maximum, TREBLE knob
treble at least. Press F on the TV
simultaneously with a button on the remote REVEAL.
* * *
TX-W28/32/36D2DP/L.
Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min.
PANASONIC
Click (REVEAL) on the remote. Press and hold button (VOL-) to the TV. Yield - (NORMAL)
* * *
Chassis EURO-4. TX-25LD4C, TX-28LD4C.
Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min. Press and
hold the button (VOL-) to the TV. Press (INDEX) on the remote. Exit - (N)
* * *
PANASONIC EURO-9L
ALIGNMENT SETTINGS
1. Mount the controller on NZCH BASS max, set the treble to
lowest position, set the volume to a minimum Press
down (- / V) to the customer on the front of the TV and at the same time press the button INDEX
remote control, it will place the TV in service mode 1.
2. Press the red / green buttons move up / down functions.
3. Click on the yellow / blue buttons to change values of the function.
4. Click STR after each amendment was made to store the required values.
5. To exit the service mode, press the "N".
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:42 pm

Chassis EURO-10.
Install regulator NZCH BASS on max, and the regulator VZCH TREBLE by min.
Press the (F) on the TV. Press and hold (VOL-) to the TV. Press
(INDEX) on the remote. What other matters in a logical and like a combination of other models for
Except that this TV to adjust the volume on the TV
uses the same buttons that select programs. Search and
change parameters are colored buttons on the remote.
* * *
PANASONIC TX-29P80T.
To access the menu must be set to control the following data.
These can be set on any channel:
Sharpness-min
Volume-min
Bass-max
High-min
The timer 30min
Simultaneously press the button (Display) (Volume -)
Bust features - buttons 1-2-3-4
* * *
PANASONIC GAOO70 TX-2170T
To enter the service menu
please click on the television V-(volume down) and hold
Press the button on the remote control button on the small screen which shows a plus. For
exit should go to the submenu. Tam in the upper right corner will be yellow and unwritten CHK nazhat N.
* * *
PANASONIC GP3
AIWA TV-A215, TV-C142
(Translation):
mode function
Plan:
MPU controls the switching function for each IC via the bus IIC in this case. The following
settings and can be adjusted by remote control in a market regime.
1. Market Selection Mode
Volume of "zero" and went to the TIMER button until 30 min. Then, at the same time
Press to recall button on the remote control button and volume down - TV
set.
2. Choice CHK Mode
The cursor moves to each CHK mode by pressing the "1" or "2" 10 key buttons on the remote control.
3. Press the button Self
Press Vol. down buttons on the front together off the timer, click on the remote control.
Training
1. The signal reception colors with color bar "OFF", and control your TV for more than 30
minutes.
2. The pictures in the menu "DYNAMIC normal" and AI. Silent.
3. Connect the oscilloscope to TPL7 at constant current.
4. Set the TV to the market Mode: white balance correction (CHK 3).
5. Screen VR: Min.
6. Set this level RGB CUT OFF / DRIVE and SUB BRIGHT.
* * *
Chassis M17.
1.Set volume 0.
2. Simultaneously press (RECALL) button on the remote control and (VOL-) to the front of the TV.
Set the volume to minimum and press the mute button timer OFF TIMER
on the remote. Next, click on the button at the same time recall the remote control and RECALL
decrease the volume button on the front of the TV. At the same time to
display will show the options menu adjustments SNK1 ... SNK4. Selecting the menu
by moving the cursor by pressing 1 or 2 remote control. In these
TV self-test mode exists in which the
Automatic functional test chips
controlled by a digital bus, and check option codes. To activate
simultaneously, click off the timer OFF TIMER button and the remote control
decrease the volume. TV will switch to automatic
PANASONIC
testing and the results of this test are displayed on the screen.
After replacing the chip non-volatile memory to the memory
initialized, ie, rewrite it from the CPU core
TV set, for the jumper between pin 3 (TRA4)
IC1231 chip and the housing and turn it on television. The data
of a microprocessor can be rewritten in the memory chip. Then turn on the MARKET
MODE. After completing the initialization remove the jumper.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:43 pm

PANASONIC Chassis M17W TC-24WG12H, TC-28WG12H GAOO
Option test
activated when clicked while the OFF TIMER button on the remote and the VOLUME
- (Minus) on the front of the TV. Setting the memory chips after
replacement. TRA14 jumper (pin 3 IC1213) and the TV cabinet
(Mass). Then turn on the TV. The unit switches to Market
Mode. After the operation the jumper should be removed.
* * *
PANASONIC chassis M18 TX-29GF35T, TX-33GF85T, TX-29GF85T:
Optional test is included at the same time if you press the OFF TIMER button on the remote and
button VOLUME-(minus) on the front of the TV. Configuring Products
memory after it was replaced. TRA4 jumper (pin 3 IC1213) and the housing
TV (mass). Then turn on the TV. The device goes into
regime Market Mode. After the operation the jumper should be removed.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:43 pm

Service mode TV PANASONIC TX29GF95T (chassis M19):
order entry, self-test items, initializing non-volatile memory
Service Adjustment
1. Self-test mode (SELF CHECK)
To enter the self-test include a TV, select Channel 1 (click
"1" button on the remote control (RC)) and simultaneously press the
mute button on the remote control and timer button (-) decrease the volume level on the front of the TV.
TV will switch to self-reflection on the screen with the results
test (see Fig. 1). In the first and third column displays the menu
tested components (integrated circuits), the second and fourth - test results
(OK-norm, NG-fault). Bottom of the frame should be a line whose color
reflects the state of the system of protection: black is the norm, red, yellow or green
color - the power supply has gone beyond the norm, overload or shutdown
strain. If this line has a color other than black
searches for causes of failure television last two columns in
Fig. 1 shows the test setup hexadecimal system
constants. Fig. 2 shows the abbreviations of test nodes
indicating their location (chip card)
To exit the self-test in normal TV mode
press any button on the front panel or remote.
Chip non-volatile memory used to store the system constants
Microprocessor
TV, as well as to store various variables.
In the event of failure of a memory chip IC1211 should be initialized
(Reflash).To do this, install a jumper between the reference point TRA14 (pin 3
IC IC1213)
and a ground bus. Include a TV switch. At this point,
initialization is a memory chip (written system
constants and initial values of variables), and the TV goes into
pre-test MARKET MODE
Then the jumper is removed.
3. Pre-test mode MARKET MODE
In mode MARKET MODE can enter two ways:
• After initialization memory chip IC1211 (see Section 2);
• from the TV mode. In this case, set
minimum value of the volume and press the off timer
Remote control. Then click on the buttons at the same time RECALL remote and the volume down on
front of the TV.
On the TV screen will display one of the modes MARKET MODE, called
submodes variant or normal installation SNK1
The order of the transition into different sub-modes MARKET MODE (SNK1-SNK5 and horizontal
line)
shown in Fig. Three sub-modes SNK1-SNK5 selected consecutively
ring: the button "2" Remote in a clockwise direction and pressing "1" remote control counterclockwise
arrow. Of sub-modes SNKZ can use the button "5" remote select
horizontal line. Exit the horizontal line is this
the same button.
Exit MARKET MODE is power off the TV.
SR submode setting SKK1 Fig. 4 shows the image on the screen
TV SNK1 submode.
In this submode are 5 ready-made initial settings (each -
different numerical values). For each model, the value of each TV
position is fixed. The parameters chosen volume button remote control, and
keep pressing "O" remote.
3.2. Submode settings VCJ SNK2
In this submode adjust the parameters listed in Table. 1.
The choice of parameter adjustment is made buttons "3" and
"4" remote control, and changing it - the volume button remote control.
3.3. Submode white balance settings SNKZ
In this submode adjust the parameters listed in Table. 2. Choice
parameter adjustment is made buttons "3" and "4" remote control, and its change

buttons adjust the bones of thunder remote.

3.4. Submode correction settings screen SNK4
In this submode adjust the parameters listed in Table. 3. Choice
parameter adjustment is made buttons "3" and "4" remote control, and its change

buttons adjust the volume of the remote control.

3.5. Submode setting additional image SNK5
In this submode adjust the parameters listed in Table. 4. Choice
parameter adjustment is made buttons "3" and "4" remote control, and its change

buttons adjust the volume of the remote control.

It should be noted that submode "horizontal line" (see Fig. 3)
used for quality control of white balance (SNKZ).

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Example of setting the white balance /
Include television and give him a warm up for 15 minutes. The input of the TV
give a signal of color pages and off color (COLOR OFF). In
custom menu set the TV mode STANDART. Pen
regulator SCREEN, located on the body row of the transformer FBT,rotate counter-clockwise until until the image on the screen will barely
seen. Connect an oscilloscope probe to the control chassis tochkeTPL7 TV.
The TV to adjust the white balance submode SNKZ (see
Fig. 3).

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Choose the option G-CUT OFF and go to sub-mode "horizontal line".
Change the selected option (see Section 3.3) so that the level of
constant component video signal on an oscilloscope screen was at least 190
(See Fig. 5). Slowly rotate the knob clockwise SCREEN to
appears on the screen image a distinct thin horizontal lines
green. Then adjust the parameters of R-CUT OFF and B-CUT OFF same
way until the screen displays a white horizontal line (3.3). Out of
submodes "horizontal line" in SNKZ. Changes in the parameters R-DRIVE and B-DRIVE
achieve achieve a uniform white color with a white band image
gray scale. Note. Since the operation mode is enough MARKET MODE
responsible, in order to avoid hassles associated with incorrect installation
any parameter, it should be in writing to fix its initial value.

* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:43 pm

PANASONIC MX-1A TC-21E1R
To enter the service mode you must click on the main board of TV
service button S1101. Appears SNK. After the first press to
regulate basic (brightness, Contrast,
saturation, volume and phase (horizontal alignment)). Second press on
button allows you to adjust color mode RGB. FUNC - changing the regulated
object
NORM out.
Login: press the button on the main board S1101 (Service). The screen is lighted white
field without a label. Clicking on the button (Function) change adjustment (brightness,
contrast, saturation, volume, tone, centering on the horizontal. Change
level option buttons (Vol +), (Vol-). The second pressing S1101
carries TV service in the second sub-mode control: the black level R, G,
B, swing signal R, G and thin horizontal line (setting Uusk).* * *
PANASONIC MX-1A TC-21E1R
To enter the service mode
please click on the main board of TV service button S1101.
Appears SNK. After the first press to adjust the basic
(Brightness, Contrast, saturation, volume and phase (the alignment
horizontal)). A second press of the button allows you to adjust the modes
color RGB. FUNC - change of the controlled object, NORM output.
Login: press the button on the main board S1101 (Service). The screen is lighted
white field with no inscriptions. Clicking on the button (Function) change control
(Brightness, contrast,
saturation, volume, tone, centering on the horizontal. Changes in the level
option buttons (Vol +), (Vol-). The second button takes the S1101 in TV
second sub-mode service, control: the black level R, G, B, swing
signal R, G and thin horizontal line (setting Uusk).
* * *
PANASONIC CHASSIS MX-2A
TC-29V50R tuning mode: Press
button service switch S1101 (located next to the switch
alignment) TV switches to scan mode appears on the screen
SNK. Click S1103 (FUN) to select the necessary adjustments to exit
Click S1101.
* * *
PANASONIC CHASSIS MX3, MX-3C.
At the same time, press RECALL
on the remote and on-VOL of the TV. Exit 2 times to press the button on the remote
NORMAL.
Hotel Mode: 1. On the remote control - (OFF TIMER), panel (CH UP) - incl. 2. To control

(OFF TIMER),

panel - (VOL) - Off.

* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:44 pm

Chassis MX-3V.
Service for TV: Set the volume to zero.
Press (MENU) and then move the cursor to FETURES. Click on the OFF button
TIMER. Right click on the remote control at the same time (RECALL) and (VOL-).
Tools for VCR: Set the volume to zero. Press (MENU) and then move
cursor to FETURES. Click on the OFF TIMER. Immediately at the same time
Click the right mouse button on the remote control cursor (VOL-).
* * *
Chassis MX-5 MX-5A. TC-14D2, TC-25GF10R, TX-33GF15P, TC-20S2, TX-20S2T,
TC-21Z2A.
Set the volume on the TV equal to VOL = 0, and set
mode timer to 30 MIN. Next, simultaneously press the CHANNEL UP to
TV and RECALL button on the remote. Exit 2 times to press the button on the remote
NORMAL.
* * *
Chassis MX-5A.
Service mode is divided into two sub-modes.
1. Subregulirovki submode. To enter the sub-mode, set the timer TV
30 min.
The value of the volume set at about the same time and press RECALL and
button VOL (-).
The choice of setting the required parameters by the buttons 1 ... 5. Change
parameters by using the buttons VOL (+) and VOL (-). To exit
sub-modes to save changes, you must double-click on the remote control
button NORMAL.
2. Submode white balance. Set the timer on your TV
value of 30 minutes, then press the RECALL button, along with the VOL (-). For
select an option press the SPC 5. Changing the parameters is carried out with
Use the VOL (+) and VOL (-). To exit the sub-modes while maintaining
changes, press the remote button twice NORMAL
button or the OFF / ON.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:44 pm

AIWA TV-A215, TV-C142
PANASONIC CK 6271 WP
Log in
service menu to 1. Hazhat button (HIDDEN) - hidden on the remote control 2.
Hazhat very quickly last. (Stand-by) 3. (P.std) 4. (Help) 5. (Sleep) 6.
(Power-on)
* * *
PANASONIC TX-21JT1P.
Select a channel 60, set the value of
SHERPNESS (SHARPNESS) at a minimum, and simultaneously press the buttons (VOL-) to the front
panels (OFF TIMER) button on the remote. Remember values (STORE).
* * *
PANASONIC MX-4S TX-25G10T.
(VOL) at least
(OFF TIMER) for 30 minutes,
(VOL-) + (+).
(1), (2) - Menu selection CHK1-CHK4
(3), (4) - menu
(VOL + / -) - modification
* * *
Firm in the model PANASONIC TX-21AD2C
also uses
opportunities for I2C bus
TV self-test. For automatic testing device must
run self-test by pressing the front of the TV the F
simultaneously with the STATUS button on the remote.
The microprocessor will check the bus I2C and generate on-screen message
on the findings. If, instead of OK, a dash, the validator
not responding. Table. 2 lists some values of numbers
faults and defective components.
This table is also valid for models TX-29A3C and TX-25A3C. But in order to
run them in self-test mode, press the front panel
TV button simultaneously with the V-click
OFF TIMER on the remote.
Table 2
Number of component failures Explanation (a faulty item, block)
1 Tuner Tuner
2 VIF intermediate video frequency
3 EEROM EEROM
6 Video Processor VDP
7 TRU Teletext Processor
8 MSP audio processor
Dolby IC chip 10 Dalby
23 DEFL Sweep
24 RAM RAM
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:44 pm

Service mode TV «Panasonic TX-25GF85T»
To enter the service mode includes a TV, it is heated about 15
min, and then simultaneously press the RECALL () on the remote
control (RC) and Volume Down button on the front of the TV.
TV will go into service mode, and its screen displays "SPC".
To enter the adjustment mode press the select button function (FUNC) for
front of the TV. After that first appears on the screen
parameter adjustment - COLOUR
(Adjustment of color). Change the value of the selected option is
volume control buttons on the remote or the front of the TV. Choice
subsequent adjustment of parameters is carried around the ring the FUNC. In
table shows the main parameters of the service mode adjustment.
It should be noted that adjusting the parameters grouped into the following groups:
• the group of major adjustments, the position 1-5 in the table;
• band sound adjustments - Pos. 6-8;
• Force selection system - pos 9.10;
• Group control the geometry of raster and other adjustments, REF. 12-19
(DEFLECTION ADJ
MODE);
• Group white balance settings and the picture tube (CRT) - Pos. 20-25;
• group settings adjustments additional images - Pos. 26-33 {PIP
ADJ
MODE). Note. To enter the group settings tube
press the disconnect timer (©) on the remote control and the FUNC button on the front
the TV.
To return to normal TV mode from any adjustment
setting press the N key on the remote. To exit the settings in the tube
normal mode press the button twice N.
Setting RF ACC (AGC level tuner)
Said adjustment is required after replacing the tuners.
To the antenna input of the TV with the TV signal generator signal is fed
vertical colored stripes on the level of 63 dB 75 Ohm load. Connect
DC voltmeter to test point on the chassis TRE1 TV.
Adjusting RF
achieve a situation in which maximum voltmeter
just before the sharp decline in voltage.
Adjust the contrast and brightness
Said adjustment is required after replacing the tube or after a change
electrical characteristics of the tube due to aging, as well as other
elements of the TV circuits are located f brightness and contrast.
To the antenna input of the TV with the TV signal generator signal is fed
vertical colored stripes. Connect an oscilloscope to test point TRE38
(G-OUT). In user mode, set the average levels of color,
brightness and contrast. Install a temporary jumper between control
TRE32 points and TRE35. After its installation point to the fact that in this
If the system is prohibited to operate the current limit of rays (or OTL
ABL) tube, thus avoiding damage to the tube
any subsequent adjustment is carried out as quickly as possible.
Change of the adjustment parameter BRIGHT (item 3 Table e) seek,
that the level of the "pedestal" (Fig. 1) video was 2.6 6
(Monitored on an oscilloscope). Then change the adjustment
CONTRAST setting try to see between the "pedestal" and the maximum
video voltage level was 3.7 6 /
After adjustment remove the temporary jumper.
White balance adjustment
Said adjustment is required after replacing the tube or after changing its
electrical characteristics due to aging, as well as other elements
TV, located in the chains of the brightness and contrast.
?
In user mode, set the adjust color and contrast
in the middle position. The input of the TV signal is fed a white field, and then
adjust the contrast set to a position in which the image
barely visible on the screen, or at a minimum. Connect the oscilloscope to
reference point on the board TPY7 L (output video amplifier
green). Pass mode preset brightness BR (pos.
23 in the table). Change the value of each item to the lower level
boundaries of the signal on the oscilloscope screen was equal to 195 (Fig. 2), long inscription
«BR» on the screen has not gone out, click on the remote control
Off Timer button.
Then in the middle of the screen should show a horizontal bar.
Adjustable parametersR_, G_, B_ (pos. 20-22 in table)
Fig.2
try to see that the horizontal line of green on the screen was barely
visible. Then change the parameters and B-R_ achieve staining
horizontal uniform white color.
If a white horizontal band was not achieved, re-
perform the previous adjustment. To exit from a horizontal strip in
full-screen mode to re-press the timer button.
In full screen mode adjusts their parameters and B-R_ (pos. 24, 25
in the table) so that all of the screen was marred uniform
white.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:45 pm

PANASONIC CHASSIS Z5
TC-14S1RCP, TX-14S1TCC, TC-21S1RCP, TX-21S1TCC, TX-21S1TCP. This chassis has
self-test capability. To call the regime of self-testing is necessary
push button simultaneously OFF Timer button on the remote and VOL (-) on the panel
TV. Then the TV will enter into the process of self-testing and will issue a
screen message, which is shown in Figure 1
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
What do the these data. 1 (+) test EEROM (IC1205) plus indicates that
OK, 2 (+)
Check the microprocessor Teletext, 3 (+) Check the tuner. Attention: Model
TV show without teletext option 2 (-).
Next, you need to make the installation options.
1.Set color saturation and sharpness to the minimum
2. Press OFF Timer on the remote control and the F key on the TV.
Image is displayed? as in Figure 2

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

3. Select an option UP / DOWN keys on the remote.
4. Select the decimal value of the keys 0-7.
5. Click on the STR to store the changes.
6. To exit the TEST mode, press F.
* * *
Chassis Z7. TX-21K1T / R, TX-21K2T, TX-14K1T, TC-14K1R, TX-14K2T,
TX-21JTP3.
Select a channel 60, and simultaneously press buttons (VOL-) and (OFF TIMER).
Remember values (STORE). Exit (NORMAL)
* * *
Chassis Z8. TX-21CK1.
Select 99 to set the value
SHERPNESS at least. Press and hold the remote control (MUTE). Click on
TV keyboard button (¢). Exit (NORMAL)
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:45 pm

PANASONIC Z-M3L (translation):
ALIGNMENT PROCEDURES AND installation options
Entering service mode
Service mode entry by selecting "Mute" key remote and local
"Down" along with the sharpness of DAC value
Minimum Programme and the position of the chosen 99.
Service mode 2 is selected by pressing the recall key being on the distant
Service mode 1.
Service mode navigation

Up / Down remote keys: cycle through the available service points.
/ + Remote key: Decrement / Increment the values within the range.
TV / AV: Keep the current data.
0 - 7 numeric keys: switch the bits 0-7 in byte form (service

Mode 2).
Sub-color: Set the sub-colour to 16 years.
Sub-Brightness: Set the sub-colour to 33.
G2 alignment: Before entering the service mode, recall the nominal
Photo Settings: remote key "N".From this setting, increase brightness in 11 steps and reduce the field to
minimum.
Tune color bar signal Prg 99 and enter the mode SVC. In SVC mode,
Select "G2" point and click - or + key to remote control
software off the vertical displacement. The user must then
G2 adjust the tension on the FBT, to find the point where the LED is ON. Press -
+ or the remote key to return to normal SVC.
White Balance: - Select a dark picture and adjust the cutting of red and
Greens Cut the desired color temperature.

Select a bright picture, a set of 32 Blue Drive and Drive set up red, and

Green Drive in
the desired color temperature.
* * *
TV Panasonic TX-14B4TP,
CPU
TDA9361PS/N2/4I0951 CD3932 VC4L40 MS9361/N2/4-DD1, tuner
TEDE9-320A, memory 24C16, PAL / SEKAM DK / BG.
Entering the service menu: Select the channel P = 99, to withdraw
Sharpnes = 0, press the Mute, and both P-(TV) + Display (control).
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:45 pm

TV Panasonic 14 "-" Chinese »(8891CSCNG6V12),
Microprocessor: TOSHIBA-HAY-26
8891CSCNG6V12, similar to the UPS chassis 3u01 (trehtranzistorny "China"), ZQ - 8MHz,
Tuner - VS1-1G5-BG, EEPROM - 24LC08, MUSIC - MD1803DFX.
Attention - TV remote control works with the type DZ02 = 54V3.
This processor is described and vik57 JUDI71 and was mentioned
but information on entering the service menu - has different interpretations.
Here is a detailed description of the entry and work in the service
Menu - collected from the described here JUDI71.
Entering the service menu:
1. volume to remove the "0"
2. At the same time to press "VOL-" key on your keyboard at the local and
Remote DISP (rectangle with a "+") (in a manner not enter JUDI71
worked and "toshibovskim" - for "88hh" characteristic - no problem).
Find ourselves in the mode FACTORY
3. Press DISP again and find ourselves in sub B / W BALANCE.
4. Once again, press DISP and sub-F1 is exerted.
5. Toggle menu pages - buttons to direct digital
program selection (0-9 or click MUTE - after the first connection
TV and enter the service menu you will get a submenu 0-7.
6. Be in a submenu F8 - F15, ie, 1 to 15 sub-admissible
if, being in the F1-F7, type ANY combination of these -
"6483", "2483", "6568" (and it's just a description of JUDI71
mentioned) and you will see a submenu F8 immediately (previously unavailable).
The transition between the F1 - F15 seems - or digital direct selection buttons
programs 0-9, or click MUTE.
7. Exit s / m - by pressure DISP.
Here it is a "trap" of the so-called menu, which was previously found not succeed.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:46 pm

TV + DVD Panasonic on M37160M8-073FP
24S08A + + M61260.
Composition
24S08A - EEPROM, M37160M8-073FP - CPU, LA78040 - frames, M61260 - a / n,
2SD1555 - MUSIC, ET-5S1E-EV100K - tuner, (BSQ24-01N4014K) TH-YBSC44014K-
TDKS, TDA7057AQ - ULF, TEA1506R - UPS, 278R05 - controlled stabilizer
5 volts, T3833-002J (RC), 10N60B - key unit.
Entering the service menu:
To enter the service menu - pressing of keys hidden in the remote
(In the remote native Panasonic IC firm JKT used type T3833-002J (24
O - "planarka") - in the second row from the bottom right-most), which is equivalent to
jumper 3 and 7, the output of IC. The translated sections of digital SERVICE
holds the keys for direct access to the program: 0 - 9, as well as pressing
Serial buttons TV / AV on the remote control that provides access to 12 sections
menu, as well as to replace the logo section. Translated and the rest of the election
parameters "+", "-" programs, and, accordingly, "+", "-" volume.
If in 07 1 OPTION SET DECODER SEL set 2, the brightness decreases in the negative
image and reminds break signal "luminance" and the image flickers.
Exit the service menu with saving changes in the parameters - pressure on the remote control key MENU.
For information:
1. TV without the EEPROM starts, but seconds later (8 ... 10), the processor like
"Initialization" holds, then press the "P +", "P" bar or "P +", "P"
"Network" in the remote-PP translated. In such a TV "workable" fullychange the menu settings made, AUTO passes channels with increasing
their numbers and so on, but TV "does not understand," he with a DVD video recorder. A similar
behavior with EEPROM "pure» (FF).
2. When mounting the EEPROM can not be set, and put the above options.
3. "B +" in the operating mode - 110 V, in standby mode - 30 volts.
4. The feet 278R05 in operation and enabled DVD: 1 - 7.5 Volt
2 - 5.0 volts (with eg. "+5" to 2 pin only when the DVD is included,
ie to the control of the 4th output 5.0 volts is applied at the same time).
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:46 pm

TV Panasonic 15 "
- On the set
M37160M8H-081FP - 24C08-M61260 - (RC) RS09-4.
Entering the service menu for the CPU that the 3rd option,
ie MENU button and quickly dial 6 4 8 3.
Information on how to change remotes: Remote W7-M031B (which comes with
M37160M8-064FP) = Remote RS09-4 (M37160M8H-081FP -15 "Panasonic)
= RS09-M301S (Samsung on M37160M8-064FP).
For information on menus and graphics are mind M37160M8-064FP and M37160M8H-081FP identical.* * *
TV Panasonic (15 "Flat) TC-1500DX.
The sticker on the chassis - CY-PH1421TOP VER1.0 (2) KB-3150
Memory - FT24C08, processor - TDA11106PS/N2/3/AB5 06 CH9155 CH7777
Company NXP, ZQ1 (G701) - 24.576 kHz, the sound - TDA2003, HR -
LA78040B, TDKS - BSC25-T1010A (BSC25-09N20E), HOT - D1555, block wells (5 Volt) - TNC8337-DFS.
On the monitor, described in detail by the UPS ("Chinese" trehtranzistorny standard).
Remote control (native) - 54D5. Analogs RC: 5Z51 = 54B3 = SYZ = 05D5A =
55K9 = 53W3 = HX55K8 = 57L8 (Panasonic) = 50JI (Sharp) = LW-55L7 = KLX-55K9T =
Entering the service menu with remote staff - RC finalized-button direct entry into the service menu is added:
1st Pressing - on the TV FACTORY
2nd Pressing - on TV B / W BALANCE
3rd squeezing - the TV service menu sections
4th squeezing - a return to normal mode
Enter the menu and service other way possible - by typing MENU
code on the remote control and 6, 4, 8, 3, and then switch the sections in the menu
DISP work, Mute (switching sections and subsections of the menu)
channel switching and P +, P-, and the volume Vol +, Vol-, and
Output from the service menu - MENU again to dial the code 6 4 8 3 enter
of section FACTORY.
For the record
1. Without memory TV does not start.
2. With a "clean» (FF) TV memory starts itself to normal operation after
5-7 seconds after you connect to the network, but the s / m is immediately after
out of any - TV fully functional. When you run
AUTO starts tincture of all available programs (with the correct
location of sub-bands), but there is no Russian language menu (it is necessary
Plug in a "trap" beating). The foregoing accurately shown for the composition of the chassis.
"The Trap" menu: In M2 (second sub-s / m) SETUP SELECT set
equal to "1", since "0" - only the sections 0 and the first, and when "1" open all sections.
In the service menu has two sections of the test-signal integrated: the grid, the cross, white, black and RGB fields.
* * *

من طرف **أشرف عثمان** الجمعة يناير 29, 2016 2:46 pm

Chinese TV Panasonic, SONY, Jinlipu and other
Processor M37160, video M61260 (64). Log into the service menu:
1. elect channel tuning
2. choose the exact configuration
3. Activate the setting precise Vol +
4. Number buttons digital service menu is selected
Storing automatically when you exit through the "menu"
* * *
TV Panasonic TX-21RX20T (TH).
Enter the service mode: Sets - set to 0, the timer is set
- 30. Push simultaneously the volume "-" on TV and on the remote INDEX. Between
Service section (1-2-3) to move the button "1" or "2". Login
section and move inside - buttons "3" and "4". Change settings
- The volume "+" and "-". Conservation - "OK" (immediately after the change of an item). Exit the service menu - STBY.
* * *
TV Panasonic TX-29PS12P,
chassis CP-830FP, composition: VSP 9402 processor DDP3315C.
Enter the service mode: 99 channel select, sharpen install
at least, push and hold the remote control button (mute) on the keyboard to press the TV button (- / V).
* * *

service-mode-PANASONIC

service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC

رد: service-mode-PANASONIC