service-mode-SONY

SHIVAKI STV1415 11AK20 CHASSIS
To enter the service
necessary in the course of 4 seconds, the login process to implement. Necessary to press the remote control the following
keys in sequence. (VOL-), (Prog), (-), (TV). The parameters chosen
buttons (PROGRAM DOWN) (PROGRAM UP), and change (VOL +), (VOL-). For
Memory push the button red. To exit, click consume TV.
* * *
SHIVAKI
STV model 2110, STV 1414 / 1 (chassis DY321DY300,).
Mode service is activated SVC control button console. In the Service
AGC adjustment is made, white balance, the amount of horizontal and vertical
subyarkosti adjustment. Click on the brightness is adjustable. 7 button scanning
Personnel disabled. 9 button white balance is adjusted for size
horizontally and vertically. In the service range of the adjusting parameter
concrete is being implemented with the buttons PR (-) and PR (+), and adjustment
preferred by the - by pressing VOL (-) and VOL (+) control panel.
To exit the service push button on the SVC or unplug the device.
* * *
SHIVAKI STV2905, DY-900 1CHASSIS
. Push down on the SERVICE
button control panel. 2). In this case the image will appear OSD (onscreen display)
"Line SVC". After that, push the button -/-- control. 3). At this time, committed
download these programs recorded in the memory of the microcomputer. 4).
loaded data is represented as follows:
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

5). Color programs recorded on the OSD - green. 6). To view
programs written in the memory, push the button PR +, -.
Adjust V-SIZE (Vertical size) 1). To receive the table
RETMA test press on PR +, - button. 2). To perform the adjustmentpush the button "6" remote control, and the picture seems OSD "STV VAMP32". 3).
Pressing on the button VOL +, - size
adjust vertically. Other adjustments are similar.
* * *

SHIVAKI STV-101 HOTEL MODE
UP TDA9381PS/N2/3I1300, 4 pages LPLUS9381-01
On the panel must be a key entry into service - SVC -, well and further
I look for in service Mode!
Anatomiruy panel required on the left button on the bottom row. Difficult to understand just
fall as customers in the service without revealing anything.
* * *
SHIVAKI STV-2038
M4, video - LA 76810A, LC863332A,
To enter service in the remote home button solder between 2 and 16 ends
ms. We press the button the 1st time - on the screen: FACTORY; we press the 2 nd time - on the screen
B / W ADJUST (control regimes CRT), we press third time - ADJUST (geometry)
then click on PDE - ZOOM - installation options.
* * *
TV SHIVAKI STV-2122 multi,
CPU
LC863320A-5N17, memory EEPROM 24C04, video LA76810,
sound IC LA7642N, remote control STV-2122 multi (IC M61340-20).
Trouble is the same: "... the microprocessor LC863320A,
fault - from the DR is not included. Defective 24C04 EEPROM.
When changing to a clean, including a TV, and appeared to
screen saver content follows a boy with a fish on
hands (or the same manufacturer's logo is derived from 12 characters) ... "
Splash in the OPTION removed, the line CUSTOM LOGO - 0, moved to - 1
Entering the service menu come: MENU, once MENU,
then Q. VIEW, and finally MUTE. Page Navigation menu - SLEEP. Exit from service - MENU.
* * *
TV SHIVAKI STV-1585 - (8851CPNG6EG1),
Setup options for the remote and tuner. Chassis - PAEX0048E,
CPU - 8851CPNG6EG1 VER, UPS - Transistor, Tuner - ET-5V1E-CV200K, IC CD - LA78040.
From memory, net tv normally starts. Options, geometry and color
I'm with a remote control TV-29B24 rules the TV model POLAR
entering the service: "volume," together with "DISPLAY", then "DISPLAY", "-volume" and "DISPLAY" = mode D.
The processor initializes the memory clean by this board into default. Options are set CUSL 0Eh, CUSH 0Eh. Search rom
with other devices on the processor failed to find options
Remote control RC-native 815. This option CUSL 08, CUSH F7.
The tuner is analog, I have the menu with the search tv bought in frequency,
and, the option of putting in MOD2 1E, and the menu appears with line search and found the channels.
Secam SECD option included - at a value of less than 1A at SECAM
weak reception is stable, according to the table of alex3, consults 08.
* * *
For STV-2937
Entering the service has to be this:
There are three modes of service: D, S, M.
D-mode - extended service;
S-mode - a service;
M-mode - training + accelerated.
Log in S-mode service adjustment (SERVICE MODE) with an ordinary remote control:
operating mode of the device and hold pressure on the front panel
button VOL-(volume in the lowest position), push the DISPLAY button to
Remote control. In the upper left corner of the screen apparatus occurs symbol S, denotes
the inclusion of a special regime of service regulation.
When pressed on the remote control buttons on the screen -/-- Frame Scan disappears.
From the emission of a horizontal narrow band accelerating voltage can be adjusted.
Values ​​of the functions controlled automatically stored in memory.
Log in modes of service D, M is likely only with a special remote control service.
* * *

And for SHIVAKI STV-2965
Entry into service is.
1. Put the volume on the TV that is equal to "O" (certainly).
2. Hold the button "Vol -" on the machine, push "DISP" button on the remote.
3. On the screen in the upper right corner will light up the letter "S", and in the corner left
adjustable parameter will be highlighted and its value.
Switching between the buttons done, "P" and "R +" modification
settings - buttons «Vol-» and «Vol +», as in the apparatus and the remote control.
Exit from a menu of service and saving the changes click "Stand-by" button on the remote in the parameters.
* * *
TV SHIVAKY STV-2175,
memory 24C16, percent. 8821CPNG4RJ1, frame. STV9302A, BP Tbip + discrimination.,
ULF LA4266, TDKS BSC25-N0802ER, PC discrimination., Tuner UVC68K9VCK, remote RC-820.
Lost during image viewing, OSD and sound - there.
In the AV all is well. Processor was dead - to see, tipovuha.
Replaced 8821CPNG5CR2. Earned all at once except buttons
Ch + - on the face and remote. Apparently some bytes in the firmware
change is necessary. Cured by pouring ERISSON 1401-2 firmware.
Entering the service menu: Volume set to zero,
then the panel on volume - and simultaneously display (panel).
Adjust the vertical size - parameter HIT
* * *
TV SHIVAKI STV-2038 M4,
CPU LC863332A video - LA 76810A.
Log into the service menu in the remote home button solder between
2 and 16 feet ms. Click a button the first time - on the screen: FACTORY;
press a second time - on the screen B / W ADJUST (control regimes
tube), the third time - ADJUST (geometry), then a button on the remote - ZOOM - installation options.
* * *
TV SHIVAKI STV-20L1,
control processor TDA15063H/N1B00.
Enter the service mode: remove the volume on 0.Sinhronno MUTE push button on the TV + MEHU.
* * *
TV SINGER,
SELECO FORMENTI
manufacturing, chassis FPC 2002.2, Processor TDA 9350PS/N2/2/0771 CB 6003 K2K297 Swing 01.2.
Entering the service menu: disp (on TV) + power (on the remote).
the first option, all standards are set, but SECAM
not really. DK IF filter with a change in the options I put 03 (PAL DK PAL BG) and transcoder.
* * *
Skyworth TV model: 32L98SW.
8M10 chassis. Processor - MST9U19AL-LF, FLASH - 25X40VNI, DDR - NT5DS8M16FS-5 memory - 24C64AN, sound - TDA2616.
Enter the service mode:
1.Ubratgromkost panel to zero, holding it, press the button on the display.
2.peredvizhenie the pages click Menu.
3.pri pressing on the "serpent" (round arrow) in the output AGING MODE.
* * *
TV Sitronics STV2132f and Avesta 54TTS-03
CPU HISENSE 8821CPNG4UD4
Entering the service menu:
1.nabiraetsya 30 channel
2. recruited 88 channel
3. volume set at minimum
4. Turns mute. We go to the M pattern
* * *

TV SKARLETT SC-TV2104,
m-PROC ST92T195D7B1 M224F0204, EEPROM 24C08, TRANSFORMER BCK-4079WH,
POWER STR-G6653, HOT ST1803DHI, v-PROC STV2248C, FBT JF0501-19 242,
TUNER EWT-5V3K2-E46W (analog: AGC, VT, U, H, L, M, .. If), V. DEFLECTION TDA8174A
Log into the service menu: - hidden button on the remote control (the third under POWER)
* * *
FALCON 51.37, 54 TTS6151, 6150, 6155
. Z9023306PSC CPU.
Entry into service: The TV is connected to the control pressure (DISP) (FUZZU) (TIMMER)
* * *
FALCON 54TTS6100
. Entry into service: On the TV is turned
pressure from the control (DISPLAY) (MUTE) (SLEEP) (FUZZU)
* * *
TV Sony,
LC863532B-54R6 + LA76810A. Remote Remote Control - 52H8.
Warning: ENG.OPTION set equal to 1, because at the value
0 - 00 ... only sections 03 and if you specify 1, all sections 00 ... 15 are opened.
Options similar to the corresponding options LC863532C-55R9.
Paging menu - Vol + and Vol-.
Pressing Mute on the remote control (speaker crossed) - Off Vertical.
* * *
SERVICE S O NY
* * *
Diagnosis and treatment service chassis SONY BE-3B.
Diagnosis and repair of modern TV with I2C bus is not possible
with little or no knowledge of the error codes, modes of service and fault
model. The information in this article, information can quickly and efficiently
find and eliminate defects inherent to the model Sony KV-M2540 (41) K with the chassis BE-3B.
Program self-BE 3.
Transferred to the identification of errors by BE-3 to befall one of two ways:
1. Bus is busy.
2. The device responds to the command is incorrect.
In the case of one of these situations, the program will try
First, the bus free if it is busy (in case of failure will be
informed about the continuous blinking LED indicator), and then
Contact every device to be relevant to monitor the them to defect. If the defective unit is found, its number will be shown a series of flashes Side
(See Table transcript. 5), thus declaring non-fatal error.
If you found a bug fatal, the receiver is able to simply remain,
where was he when the error is befallen, if not a fatal error, the receiver will try to continue the work.
Table 5
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Recommendations for repair.
These tips only for those vehicles needed in the scheme which has not been entered yet
provided by the change.
* * *
Apparatus model KV-M2541K and KV-M2540K.
Symptom: No screen, high-voltage and audio device in the mode of "Stand-by" is.
Reason: Injury bit reset chip IC002pamyati, the board A, ST24C16CM1-TR / A (9 - 759-277-89).
Solution: First of all, should try to restart the procedure
memory chips without changing it. The need for this jumper to put on A board - pin 9 CN001-7 connector to ground (slant board Across Pin 1, 9 - upper range). 2
WARNING!
Installation of the jumper removes protection! Then be
connect the following sequence of commands from the remote service:
[5], [-/--], [5], [9], [T] [T], [4], [9]
In applying the usual procedure of the remote command as follows:
[5], [-/--], [5], [9], [Stand-by], [Display on screen], [5], [Volume +], [TV], [4], [9] .
Then turn off the TV button on the panel front, wait until
LED goes out, and reconnect the TV. After a few seconds
image must appear. Remove the jumper on the motherboard A, setting
geometry to make, if necessary - the white balance. Then, in the mode
make test command 27 (Destination = K). If after 2-3 attempts failed to reach
the appearance of images, replace the memory chip, and make the necessary
adjustment. To avoid damage to the repeated data memory to Mc
appropriate to make changes on the board of A (see Figure 7):
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
Fig.7
1. Put the resistor R304 and transistor Q305.
2. Remove capacitor C30.
3. Trim Track 5B - 8 Pin MS002 Q305: 2SC2412K-T-146, p / n 8-729-907-23
or p / n 1-247-855-JC-91libo 501-1, p / n 8-729-907-23 R304: 10K, 0,1 W, p / n 1-247-855-81.
These changes in the design of television sets made at the start of the head. №
4046344 (KV-M2540K) and number 40,003,101 (KV-M2541K).
In the event of a similar re-defect in the transformed unit must have:
1. Change memory chip IC002: p / n 8-759-277-89.
2. Put the CPU version later IC001: p / n 8-752-862-91 / 3.
Symptom may experience symptoms vary:
• no text: the importance of "FAST BLK" in the menu service must be 01 Instead of the 00.
• jumping picture: the importance of "INTERLACE" in the menu service must be 00 Instead of the 01
• Geometric distortion: change vertical size, etc.
• recorded in standby mode "Stand-by".
Reason: typing errors, associated with a menu replacement program ("programme exchange").
Solution: Change the on-board a chip in accordance with Table 6.
Table 6
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Symptom: when viewing dark scenes images from the video input or tuner through
at the top of the screen is distinguishable uniform illumination, the
brightness which gradually decreases toward the center of the screen.
The reason: the passage of low-frequency components of the video incomplete
due to lack of resistor R345 (under illumination with a video-image)
or R323 (the illumination when taking pictures with a tuner).
Solution: put a resistor missing - METAL GLASE 47K 5% 0.1W (1-216-089-00)
Symptom: when viewing dark scenes images from the video input or through
tuner at the top of the screen noticeable brightening of a spot light.
The reason: a reflection of the pulse measurement circuits balance automatically
white on the inside surface of the tube.
The solution: to reach the reflection more evenly through the small
changes. After adjustment, check the absence of reflection
when a signal is SECAM systems the black field through an antenna and low-frequency inputs, as well as the absence of a signal.
* * *

SONY BE-3B CHASSIS KV-24WS1A/B/D/E/K/R/U
. CXP85340A-116Q/117Q
RM-837. Set the standby unit. Then you need to press the remote
buttons in sequence ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
* * *
SONY CHASSIS BE-3C
KV-C2503 B / E, KV-C2508 D / E, KV-2501 A / D / K, KV-C2509 B / D / E / K.
Identify a standby machine and push the button on the remote to
following sequence: ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
Suitable remote RM-833 model.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
* * *
SONY G1 CHASSIS KV-S29 RN1 \ 34RN1
Login to service mode
being implemented with the help of RM-821pulta. Connect the device into standby mode.
Then push the combination of the following keys on your remote: DISPLAY -> 5 -> VOL + -> POWER
* * *
SONY KV-21T10R
. In standby mode, set the TV,
and press the button on the remote control in sequence befitting ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
* * *
Log in to the service in two ways by Sony. In that model, which
of them, I do not remember myself, but one of them will work, exactly. Thus:
1. Network disconnect. Press and hold the muzzle P + and P-buttons. Holding,
network to connect. Hold until the screen appears. Above right is obliged to
greens occur TT -. If not, try another option.
2. Translate StendBay TV (standby mode). On the remote
successively press' Display ', '5', 'Vol +', 'TV'.
After such a procedure must be at the top right green TT -.
If, after pressing the five heard the TV is turned on (whisper
high), then either did something wrong, or need to operate on
option 1. If this does not appear green, the same thing.
Note to the illiterate (can not read smart):
'Display' - This button on the Sony, usually a rectangle marked
with the corners rounded with a plus sign (+) inside, and close with a button that
usually a question mark is there (?) in green.
'TV' - button marked as a rectangle with rounded corners. No inside
rectangle or circle button - nothing.
Now details:
Usually, once in service, rather push the button 'MENU' button on the remote and
yourself in the service menu. But in some models does not work so simply.
Nuance number 1: AE-2 AE-2A,-2B Chassis AE.
Calling the menu, it is necessary to descend to the lowest point, marked as
'Demo'. In the user is truly demosh, but if
shine at the top right-TT -, this entry into the service menu.
Nuance number 2: Chassis AE-3 (100Hz)
Menu service is invoked by the command TT01. In general, if you are 100 gertsovom
TV was in the service mode, but can not find the menu, the detail of this for you, and dashed off.
Nuance number 3: Chassis BE-3D.
Log in 2 version. However, it is seen, although the documentation and do not reflect that
this procedure (option 2) to make three consecutive times. TE -
performed, not seen TT -, again in StendBay further. And so on,
until you see the TT-cherished -. And then the 'menu' and forward to the tanks.
Nuance number 4:
For option 2. At times, there is no button 'TV' button on the remote. Then it Zamesto
need to press 'POWER' (green). By the way, like tele-service
no menu, and do not look for it. There's all green, all for short (like VSP -
Vertical Shift ...), with no experience (or documents) will not understand (with
the first time). And the management here is somewhat different. Buttons '1 'and '4' -
that the parameters of movement, and the buttons '3 'and '6' - a change
option chosen. Well, another feature of this service - for
In order to set produced survived, prompting
their 'MUTE', '0 '. It's not bad, sausages can be it on anyone but for the
so back to the original settings, rather off-inc.
Nuance number 5:
Individual adjustment of the individual chassis operate only when filing
PAL signal. I remember at random in the chassis FE-1 "Tsenrtrovka horizontal"
and "delay of color" in the chassis BE-3D. Maybe there is still what I encountered on these here.
Nuance № 6: Chassis AE-4 (100Hz)
May encounter a situation such that most of the menu items are pale and not available for adjustment.
In order to make them available, it is necessary to transfer to a "Production mode"
TT62 team, return to the "Service mode" command TT61.
* * *

TV SUPRA (3Y11) CTV-21NX.
Entry into service: Press MENU, again MENU, then
Q. VIEW, and finally MUTE. Move through the pages of the menu - click SLEEP. Exit from service - click MENU.
* * *
TV Supra ST14CZ15S,
CPU
- LC863332B-53W3. The video processor - LA76810A, Remote
YKF-51N. Analog channel selector. The scheme is similar to 3Y01shassi, but the position of details do not match.
Entering the service menu. Remote apart. Several times jumper pins 2 and 14.
Return to the service pages - buttons ZOOM.
* * *
TV Supra S-29SL10 chassis clone 5Y19
(Label
chassis: 5800-A 5Y19 [/ b] 0-01). Memory - 24C08WP, processor - SUSOC
LA76938N 7N 58R2 6MA06, ZQ2 - 4,433619 MHz, ZQ1 - 32.768 kHz, the sound
CPU - AVIS 6XR8 LV1116N CD - LA78141, HOT - S2000AFI, ULF - LA42052,
BP - CQ1265RT - G28, FBT - BSC29-N2477, optocoupler - P621, Tuner - 5223-389W16-00 EWT-5F3T1-E06W.
Entering the service menu with the regular panel: VOLUMEustanovit to 0
Press MENU - to dial 6568 and there is a FACTORY, pushing clock (timer)
change: FACTORY - BW BALANCE - ADJUST. In ADJUST while pressing
RECALL (with the cross bar) change the page setup menu.
In the third ADJUST MENU in SETUP SELECT put a value 1 and there
All 22 pages MENU. If you select a timer - BUS OPEN, then this
regime there is no escape, only to turn off the chassis. Without EEPROM is connected,
but there is no screen, but with a clear
EEPROM is connected, there are adjustments, but is Auto Search, not finding
nothing, putting BAND OPTION = 3T and, UNER OPTION = 1, all TV
will remain a geometry set.
* * *
TV SUPRA S-14US30,
Chassis - 3P68R,
Processor - TDA11106PS/N3/3/AN9, memory - 24C08, PWM UPS - STR W6553A,
Tuner - GDC EWT-5F3T1-E06W, MUSIC - 2SD5023, KR - LA78040, TDKS -
BSC25-3355-87, a sound chip - TEA2025B, TPI - BCK-35-LF01X FJ.
Entering the service menu: MENU, then Q. VIEW, then PP.
trap menu - go to SC, dial 8 + 9. Exit - button DISPLAY.
* * *
TV SUPRA ST 21B55F
H-704V-05 chassis, CPU SDA555XFL-A14, video NN5198K, sound-MSP3460G.
Enter the menu service: With Remote Control - DISP., Then MUTE, then SLEEP, then finally FUZZY DISP.
* * *
TV TV SUPRA S-14US30 3P68R chassis.
Enter the service mode, pressing MENU, then Q. VIEW, then PP. Trap
menu - enter the SC, dial 8 + 9. Exit from the menu - DISPLAY.
* * *
TV SUPRA S-29SL10. 5Y19 Chassis.
Enter the service mode: remote control with home - a key hidden. Login
with universal MACa: code-1111-entry into the service menu key 2. The code-1401-management unit.
Below are all options service.
* * *
TV Supra ST14CZ15S.
Processor - LC863332B 53W3,
The video processor - LA76810A, Remote Control YKF-51N, analog channel selector.
The scheme is akin to 3Y01shassi, but do not match the positions of elements.
Enter the service mode. Remote apart. Jumper feet 2 and 14neskolko times.
Switch submenu in the service - the button ZOOM.
* * *
Apparatus Supra STV-LC2604W.
Enter the service mode:
working on a TV press on the remote: Mute, then Menu, then the sound menu
it choose Balans, enter (ok) (lit banner to balance) and quickly dial 3138.
The menu is a choice of service panels, film for non-compliance will be.
* * *
TV STV-2113MK2, STV-1415.
Enter the service mode: you have four seconds to carry out the procedure
entrance. It should be on TV keypad press (VOL-) and the remote control the following keys
sequentially. (Prog), (-), (TV). Press (PROGRAM DOWN), (PROGRAM UP)
choose options and change in the (VOL-), (VOL +). To store, press the red button.
* * *
TV STV-1414 / T, STV-2110.
Enter the service mode: the service is being implemented with the help of a special panel. Buttons (SVC).
* * *
TV STV-2905.
Enter the service mode: Push the button (SERVICE) remote control. 2).
In the picture with the OSD appears (display screen) "Line SVC". After that, push the button (-/--) control.
* * *
TV STV-2119.
Enter the service mode: you have to press buttons in series on the remote.
(DISPLAY), then (MUTE), then (SLEEP), and (FUZZY).
Then, when pressing buttons (DISPLAY) are made adjustable AGC and geometry, but when pressed SLEEP button - the white balance.
* * *
TV STV-2129, STV-216 MULTI, CS-29A6HTR.
Enter the service mode: (ST.BY), then (MUTE), then (MENU), and (POWER ON)
* * *
Television CTV-2139.
Enter the service mode: When pressured the AV button on the front panel,
TV's power to include and hold the AV button on the screen before the TV service menu.
Method Two: jumper at 250-500 ms kontaktiki connector service X 760.
The election option buttons P + or P-, the change in the VOL + or VOL-.
Memory is in the TV remote.
* * *
TV TATUNG: T32W440, T25/28N440, 440shassi processor: SAA5297.
Log into the service menu:
1) connect the TV by pressing the power, holding
Press down the MENU button on the keypad panel to the local until the red LED lights up.
2) Release the button and the MENU button to press STANDBY remote.
If the output voltage SCART connector 8 +12 V will be installed on the machine or a program mode will AV1.
Initialization of EEPROM memory:

• If you change the EEPROM memory of the processor or the manager, must meet the following actions:
  
• enter the service mode.
  
• With buttons VOlUME + position INI CTV 831x increase, where x - version microprocessor.
  

In the end - version the control processor will be shown, as well as all data erased, with the exception of bits of options.
Adjust service:amr_ashraf37غير مسموحelection options buttons P + / -.

• Adjusting the settings buttons VOLUME + / -.
  
• Saving automatically after exit from the service.
  

Besides standard adjustment of balance, geometry, AGC, it is possible to adjust the parameters of the following:
-Values ​​of geometry parameters must be set independently for the aspect ratio of 16:9 and 4:3.

• Parameter EW16 need to establish the value of 3F.
  
• The installation of the vertical geometry of the image to start with the VS parameter - the vertical linearity.
  

Setting the video channel (IFxxAFCxx) IF:
Installation Guide Channel drive on the sticker is located
the left side of the main board. This operation is necessary in the case
hold when the TV version of the N1 ICC2 provided chips and
Core LC7, associated with this chip. In other cases,
(In the absence of core LC7) the following must be installed:
AFC ...... 3
IF ...... 50

Adjustment of the second grid (Vg2 Test) tube:

• With P + buttons to select the position Vg2, will display a horizontal line on the screen.
  

Adjustment potentiometer on the accelerating TDKS set on the border appeared to glow through.

• push a button and VOLUME-seconds to wait for another image appears.
  

Setting the control bits (Cox):

• The control registers set the values ​​as follows:
  

Co ...... 00
Co2 ...... 96
Co3 ...... 27
Bytes options:

• Bytes options Op1, Op2 and Op3 to be installed in accordance with
  the version of the device by following the guidance (see the label in
  the unit).
  

Adjusting the A2 (LA / SA) stereodekodera:

• Place your stereo to the input device A2sistemy.
  
• disable the modulation in the left channel and parameter LA adjusted
  to achieve a signal amplitude of 1.4 V at pin SCART 1 connector.
  
• SA parameter thus adjusted to a minimum signal level listening.
  

In the absence of the generator, the parameter value to LA to 01ustanovit, and the parameter SA - for the value 0B.

Delay adjustment of the luminance signal:

• put delay the luminance signal to a signal bearing on them by color depending on the standard received:
  

Ys ...... 30 (SECAM)
Yp ...... 18 (PAL)
Yo ...... 22 (SCART)
Yn ...... 20 (NTSC)
Mapping programs in the NTSC system is acceptable only for low-frequency connector SCART.
Exit from service: to put pressure on the TV remote control.
* * *
TCL TV type TC1632TV, M66 (M68) chassis.
Mikrorotsessor: TDA12062H/N1F00, HR: STV9302, Sound: TDA7266SA,
Power supply: TDA16848, FBT: BSC 25-0252T Memory: 24C32.
Entering the service menu:

• Hold the button on the panel TV (V-) to remove the volume control to "0",
  

and it does not hold, push button three times "CAPS" on the remote. Included
in the service menu. Then, on the remote control number buttons to elect a group
value and volume adjustable. Exit from service - a button on the remote
control AV / TV. The device does not start with a blank memory.
* * *
TV TCL21E20S - M66 chassis (M66S).
UOC - TDA12062H/N1F00, Label: V8-T00M68 13M34,
IC CD - STV8172, EEPROM - 24C32, HOT - 3DD1556, TDKS - BSC 25-0252T, Key
UPS - SK3115, IC PWM - TDA16846-2P, Tuner - TEDE9-284B.
Defect: The color is missing in the PAL system and the sound is completely absent.
All of ARC restored. Hold the (V-) panel TV
to retract the "0" volume, and it does not hold, press three times at
the remote button "CAPS". Included in the service menu. Further, the remote
digital buttons, select group of values ​​and the volume is adjustable. Exit from the service - on the remote button AV / TV.
We enter into a service mode (see the link), press the number button
remote "8". A list of OR01 OR10 ... options. OR06 elect and open.
The top line DCXOMUX is listed on the contrary P3DCXO set and there is color in the PAL system immediately.
To activate the audio on the findings of UOC does not leave out this option,
but only one row below the falls on QSS and opposite "QSS Amp not active" set. Other lines (options) - no change.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
In the photo shown, as must be the correct option OR06 exposed.
* * *

TV Telestar PT-92,
CPU
TDA9353PS/N1/2L0248 TDA9353W1 TELRA, memory 24LC16B, PAL, BG, geom.est, Teletext is.
Entering the service menu: "SUB-PAGE" (TXT hours) on the remote at the TV and "Volume -".
* * *
TV TOMSON 21MX170S,
purchased here, sound, color,
Russian teletext chassis TX807CS, processor TDA9554PS/N1/1I0674 K0J009
CA1737 IVV 2.30, an audio processor MSP3415G B8, memory 24W04.
Entering the service menu: in stendbay move, the network turned off.
Txt on the remote press and hold, the network included. If there is no control of the native, the MAC 1272, 1320.
* * *
TV Thomson 29DCH61KG
Chassis - M68 - UOC - TDA
12062H/N1F00 Sticker - V8-0000M68-TM3V417 SG5741.1 CH5704, EEPROM - 24C32WP,
KR - STV 9302, ZQ1 - 24.576 MHz, HOT - D3402, ULF - TDA 7266SA, FBT -
BSC 29-0123Q 37-FCAT04-EAAOA, VC739997K26, PWM UPS - TDA 16 046-2P,
TPI - BCK 4925 36-TRF164-AXO, Key UPS - P77W78 K3451, IF - K2966M,
Tuner - 07-389F15-NA3G FSBP05P-3-E, OS - SCD29311VX2, picture tube - A68QFZ893X001.
For reference.
1. Television without EEPROM is connected and working, but the inclusion of executed about 30 seconds.
2. C EEPROM «clean» (FF) TV for about 30 seconds worth in the DR, then
he needed to "help" connect, provided that he does not himself
this, after you connect the TV stays in the service menu in the
mode "run", respectively, the values ​​of all the service menu to 0.
I do not recommend it to include a blank memory, since the process of setting up the TV is very heavy and cumbersome.
Entering the service menu: with remote staff: Volume set to "0"
holding it, pressing quickly on «CAPS» three times, get out of it: «EXIT» - «TV / AV».
* * *
TV THOMSON 21DCH61KG (M61shassi).
CPU
- TDA12060H \ N1F00 CK1797 SH5031.1 17 ZSG0748 N1F, Quartz - 24.576 MHz
Memory - 24S16WP, IF filter - K2966M, Tuner - TEDE9-284B 07-389FI5-NB1G,
Key UPS - K2645, Frames - STV8172A, TPI - BCK-4038 36TRF020-AX5,
PWM - TDA16846-2P, MUSIC - D1556, picture tube - A51ERS357X440,
TDKS - 37-FBAT04-CAA0A BSC-25-0252T, OS - AT7400 \ 10 05061EA07496.
Entering the service menu: TV THOMSON 21DCH61KG:
1. throw in the TV mode on duty.
2. button to disable network TV
3. press «TEXT» button on the remote 4. TV button to connect the network, holding the remote «TEXT», before the image.
5. buttons "1" - "9" switch adjustment service
6. out of service: click "OK" button on the remote
* * *